KEY FEATURES
This model is a development from the Mini Light PH1300-1900HO. Instead of one preheater there are two preheater 1100L each. In addition, a big-bag emptier makes it possible to load with big-bags.
The two preheaters are individual so loading and melting can be attended between the preheaters or they can be used as a joint unit.
Application can be done on both sides with the newly developed transversal gun carrier, which is hydraulically movable from side to side. The gun carrier is operated from the truck cabin. The advantages of this solution are that only one extruder /set of spray guns are kept warm all the time besides the economy aspect to have only one extruder/set of spray guns to maintain.
The Mini Light is still a high capacity machine with set ups for extruder, spray or Flexidot.
This model can be equipped with
– two alternative filling system, either with big-bags or with the pump-filling system when filling from separate boiler truck.
– Extruder 30-50 cm
– Spray guns 1-3 units
Flexidot 20-45 cm.
TECHNICAL SPECIFICATIONS
| Length | ca 7,0 m |
| Wheel base | min 4,3 m |
| Width | 2,55 m |
| Height | 3,7-3,9 m |
| Weight tara incl truck | 13.500 kg |
| Weight allowed | 18.000 kg |
| Melting set | 2×1.100L |
| Control box: | RME |
| Extruder: | max 50 cm |
| Spray block: | max 3pc |
| Flexidot: | max 45 cm |
| Bead guns: | 2-3pc |
| Bead tank: | 415-470L |
| Production pump: | RME 120L/min |
| Compressor: | Hydraulic 5-7m3 |
| Pointer: | Hydraulic/pneumatic |
| Burners: | Riello 230V |
| Temp regulators: | CAN-BUS |