KEY FEATURES
Maxi Quattro is a high-capacity machine built on a four axle chassis. There are several different setups; spray, extruder, Flexidot or combined, together with the option of one or two-colour systems.
Maxi Quattro is equipped with 4×1.200L melting units on weighing cells.
A hydraulic compressor drives the pneumatic functions and two variable hydraulic pumps on the clutch independent power outlet supply the hydraulic functions.
A crane makes the filling of big bag material into the melting set easier.
On each side there is an applicator carrier that can be adjusted both vertically and horizontally.
The control box allows automatic line system application together with pump control for accurate material flow.
The cab is equipped so that most of the work can be done inside – safe from traffic, noise and exhausts.
TECHINCAL SPECIFICATIONS
| Length: | appr 10,5 m |
| Width: | 2.55 m |
| Height: | appr 4,0 m |
| Weight, tara incl. Truck: | appr 21.000 kg |
| Weight, allowed (EU): | 32.000 kg |
| Melting set: | 4 x 1.200L |
| Control box: | RME V2 |
| Spray block: | 2-3 pc/side |
| Flexidot: | 20-45 cm/side |
| Bead guns: | 2-5 pcs/side |
| Bead tank: | 700L |
| Production pump: | RME 120L/min |
| Crane: | Palfinger PK4200 |
| Compressor: | 5-7 m3 |
| Pointer: | Hydralic/Pneumatic |
| Burners | Riello RG2 |
| Temp regulators | CAN-BUS System |